Easidew Transmitter 2-Wire Dew-Point Transmitter.

The Easidew TX Transmitter is a complete hygrometer designed for ease of use, incorporating all the features needed to make installation and operation as simple as possible.

Dew point (water vapor condensation temperature) measurement is made easy with this calibrated transmitter that can be quickly incorporated into your air or gas management control system. The Easidew TX Transmitter is connected in a 2-wire loop powered configuration. Its rugged construction makes it well suited for industrial applications. Weighing only 5.3 oz., it is light enough to be supported directly by its sample tubing without additional mounting brackets.

Documentation
Easidew TX Datasheet (PDF)


 

Product features:

Technical Specification

 

Performance
Measurement Range (dp) -100 to +20°Cdp (-148 to +68°Fdp)
Accuracy (dp) ±2°Cdp (±3.6°Fdp)
Response Time 5 mins to T95 (dry to wet)
Repeatability 0.5°Cdp (0.9°Fdp)
Electrical output/input
Output Signal 4-20 mA (2-wire connection, current source)
User-configurable over range
Output Dew point, moisture content in ppmV
Supply Voltage 12 - 28 V DC
Load Resistance 250 Ω @ 12 V Max 
500 Ω @ 24 V
Current Consumption 20 mA max
Operating conditions
Operating Temperature -40 to +60°C (-40 to +140°F)
Operating Humidity 0–100% RH
Operating Pressure 45 MPa (450 barg / 6500 psig) max
Flow Rate 1 to 5 Nl/min (2.1 to 10.6 scfh) mounted in standard sampling block 
0 to 10 m/sec (0 to 32.8 ft/sec) direct insertion
Temperature Coefficient Temperature compensated across operating temperature range
Mechanical specification
Ingress Protection IP66 in accordance with standard BS EN 60529:1992
NEMA 4 in protection accordance with standard NEMA 250-2003
Housing Material Stainless steel
Dimensions L=132mm x ø27mm (L=5.19" x ø1.00")
Filter HDPE Guard <10 μm 
80μm sintered guard (optional)
Mounting Thread 5/8" - 18 UNF
Weight 150g (5.29 oz)
Electrical Connections See table
Interchangeability Fully interchangeable transmitters
Diagnostic Conditions
(factory programmed)
Condition
Sensor fault 
Under-range dew point 
Over-range dew point 
  Output
23 mA
4 mA
20 mA

Buy: Easisew TX I.S. Dew-Point Transmitter, price: ---- euro
If you have any questions about this product feel free to contact with us by email: This email address is being protected from spambots. You need JavaScript enabled to view it. OR phone: +370 (5) 210 22 74.